NetEss v1 Student Lab Source Files Answers

9.3.2.2 Lab – Troubleshooting Physical Connectivity Answers Lab – Troubleshooting Physical Connectivity (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Objectives Examine device LEDs to determine proper Ethernet connectivity. Select the correct Ethernet cable for use between various types of devices. Visually inspect […]
Continue reading…

8.2.2.6 Lab – Establish a Console Session with Tera Term Answers Lab – Establish a Console Session with Tera Term (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Objectives Part 1: Access a Cisco Device through the Serial Console Port Connect to a […]
Continue reading…

7.4.2.3 Lab – Configure Firewall Settings Answers Lab – Configure Firewall Settings (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Addressing Table Device Interface IP Address Subnet Mask PC-A NIC 192.168.1.10 255.255.255.0 PC-B NIC 192.168.1.11 255.255.255.0 Objectives Access Windows Firewall settings in order […]
Continue reading…

6.3.1.4 Lab – Configuring a Wireless Router and Client Answers Lab – Configuring a Wireless Router and Client (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Wireless Router Settings Network Name (SSID) Home-Net Network Passphrase cisco123 Router Password cisco12345 Objectives Part 1: Configure […]
Continue reading…

4.1.4.4 Lab – Using Windows Calculator for Binary Conversions Answers Lab – Using Windows Calculator for Binary Conversions (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Objectives Switch between two Windows Calculator modes. Use Windows Calculator to convert between decimal and binary. Use Windows […]
Continue reading…

3.4.4.3 Lab – IP Addresses and Network Communications Answers Lab – IPv4 Addresses and Network Communication (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Objectives Build a simple peer-to-peer network and verify physical connectivity. Assign various IPv4 addresses to hosts and observe the […]
Continue reading…

3.4.3.5 Lab – Address Resolution Protocol (ARP) Answers Lab – Address Resolution Protocol (ARP) (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Objectives Part 1: Download and Install Wireshark Part 2: Capture and Analyze ARP Data in Wireshark Start and stop data capture […]
Continue reading…

3.3.3.2 Lab – View Wired and Wireless NIC Information Answers Lab – View Wireless and Wired NIC Information (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Objectives Part 1: Identify and Work with PC NICs Part 2: Identify and Use the System Tray Network […]
Continue reading…

3.2.2.4 Lab – Determine the MAC Address of a Host Answers Lab – Determine the MAC Address of a Host (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Addressing Table Device Interface IP Address Subnet Mask PC VLAN 1 192.168.1.2 255.255.255.0 Objectives Determine […]
Continue reading…