6.4.1.2 Packet Tracer – Skills Integration Challenge

Last Updated on March 23, 2018 by Admin

6.4.1.2 Packet Tracer – Skills Integration Challenge

Packet Tracer – Skills Integration Challenge (Answer Version)

Answer Note: Red font color or Gray highlights indicate text that appears in the Answer copy only.

Topology

Addressing Table

Device	Interface	IP Address	Subnet Mask	Default Gateway	VLAN
R1	S0/0/0	172.31.1.2	255.255.255.0	N/A	N/A
	G0/0.10	172.31.10.1	255.255.255.0	N/A	10
	G0/0.20	172.31.20.1	255.255.255.0	N/A	20
	G0/0.30	172.31.30.1	255.255.255.0	N/A	30
	G0/0.88	172.31.88.1	255.255.255.0	N/A	88
	G0/0.99	172.31.99.1	255.255.255.0	N/A	99
S1	VLAN 88	172.31.88.33	255.255.255.0	172.31.88.1	88
PC-A	NIC	172.31.10.21	255.255.255.0	172.31.10.1	10
PC-B	NIC	172.31.20.22	255.255.255.0	172.31.20.1	20
PC-C	NIC	172.31.30.23	255.255.255.0	172.31.30.1	30
PC-D	NIC	172.31.88.24	255.255.255.0	172.31.88.1	88

VLAN Table

VLAN	Name	Interfaces
10	Sales	F0/11-15
20	Production	F0/16-20
30	Marketing	F0/5-10
88	Management	F0/21-24
99	Native	G0/1

Scenario

In this activity, you will demonstrate and reinforce your ability to configure routers for inter-VLAN communication and configure static routes to reach destinations outside of your network. Among the skills you will demonstrate are configuring inter-VLAN routing, static and default routes.

Requirements

• Configure inter-VLAN routing on R1 based on the Addressing Table.
• Configure trunking on S1.
• Configure four directly attached static route on HQ to each VLANs 10, 20, 30 and 88.
• Configure directly attached static routes on HQ to reach Outside Host.
  • Configure the primary path through the Serial 0/1/0 interface.
  • Configure the backup route through the Serial 0/1/1 interface with a 10 AD.
• Configure a directly attached default route on R1.
• Verify connectivity by making sure all the PCs can ping Outside Host.

Answer Scripts

!R1!!!!!!!!!!!!!!!!!!!
en
config t
interface GigabitEthernet0/0
no shutdown
!
interface GigabitEthernet0/0.10
description Sales VLAN
encapsulation dot1Q 10
ip address 172.31.10.1 255.255.255.0
!
interface GigabitEthernet0/0.20
description Production VLAN
encapsulation dot1Q 20
ip address 172.31.20.1 255.255.255.0
!
interface GigabitEthernet0/0.30
description Marketing VLAN
encapsulation dot1Q 30
ip address 172.31.30.1 255.255.255.0
!
interface GigabitEthernet0/0.88
description Management VLAN
encapsulation dot1Q 88
ip address 172.31.88.1 255.255.255.0
!
interface GigabitEthernet0/0.99
description Native VLAN
encapsulation dot1Q 99 native
ip address 172.31.99.1 255.255.255.0
!
ip route 0.0.0.0 0.0.0.0 Serial0/0/0
!
end

!S1!!!!!!!!!!!!!!!!!!!!!!!!!!
 en
 config t
 int g0/1
 switchport mode trunk
 switchport trunk native vlan 99
 end
 wr

!HQ!!!!!!!!!!!!!!!!!!!!!!!!!
 en
 conf t
 ip route 172.31.10.0 255.255.255.0 Serial0/0/0
 ip route 172.31.20.0 255.255.255.0 Serial0/0/0
 ip route 172.31.30.0 255.255.255.0 Serial0/0/0
 ip route 172.31.88.0 255.255.255.0 Serial0/0/0
 ip route 209.165.200.0 255.255.255.224 Serial0/1/0
 ip route 209.165.200.0 255.255.255.224 Serial0/1/1 10
 end
 wr