6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge

Last Updated on March 23, 2018 by Admin

6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge

From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02 Version 5.03 Version 6.0 Online Assessment
Chapter 6 Exam Chapter 6 Exam Chapter 6 Exam Online Test
Next Chapter
Chapter 7 Exam Chapter 7 Exam Chapter 7 Exam Online Test
Lab Activities
 6.1.1.5 Packet Tracer – Who Hears the Broadcast
 6.1.2.7 Packet Tracer – Investigating a VLAN Implementation
 6.2.1.7 Packet Tracer – Configuring VLANs
 6.2.2.4 Packet Tracer – Configuring Trunks
 6.2.3.7 Packet Tracer – Troubleshooting a VLAN Implementation – Scenario 1
 6.2.3.8 Packet Tracer – Troubleshooting a VLAN Implementation – Scenario 2
 6.3.3.6 Packet Tracer – Configuring Router-on-a-Stick Inter-VLAN Routing
 6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge
 6.4.1.2 Packet Tracer – Skills Integration Challenge

Packet Tracer – Inter-VLAN Routing Challenge (Answer Version – Optional Lab)

Answer Note: Red font color or gray highlights indicate text that appears in the Answer copy only. Optional activities are designed to enhance understanding and/or to provide additional practice.

Topology

6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge

6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge

Addressing Table

Device Interface IP Address Subnet Mask Default Gateway
R1 G0/0 172.17.25.2 255.255.255.252 N/A
G0/1.10 172.17.10.1 255.255.255.0 N/A
G0/1.20 172.17.20.1 255.255.255.0 N/A
G0/1.30 172.17.30.1 255.255.255.0 N/A
G0/1.88 172.17.88.1 255.255.255.0 N/A
G0/1.99 172.17.99.1 255.255.255.0 N/A
S1 VLAN 99 172.17.99.10 255.255.255.0 172.17.99.1
PC1 NIC 172.17.10.21 255.255.255.0 172.17.10.1
PC2 NIC 172.17.20.22 255.255.255.0 172.17.20.1
PC3 NIC 172.17.30.23 255.255.255.0 172.17.30.1

VLAN and Port Assignments Table

VLAN Name Interface
10 Faculty/Staff Fa0/11-17
20 Students Fa0/18-24
30 Guest(Default) Fa0/6-10
88 Native G0/1
99 Management VLAN 99

Scenario

In this activity, you will demonstrate and reinforce your ability to implement inter-VLAN routing, including configuring IP addresses, VLANs, trunking and subinterfaces.

Requirements

  • Assign IP addressing to R1 and S1 based on the Addressing Table.
  • Create, name and assign VLANs on S1 based on the VLAN and Port Assignments Table. Ports should be in access mode.
  • Configure S1 to trunk, allow only the VLANs in the VLAN and Port Assignments Table.
  • Configure the default gateway on S1.
  • All ports not assigned to a VLAN should be disabled.
  • Configure inter-VLAN routing on R1 based on the Addressing Table.
  • Verify connectivity. R1, S1, and all PCs should be able to ping each other and the cisco.pka server.

 

!S1!!!!!!!!!!!!!!
en
config t
interface vlan 99
ip address 172.17.99.10 255.255.255.0
no shutdown
ip default-gateway 172.17.99.1
!Note: VLAN naming only requires the first letter be correct
vlan 10
name Faculty/Staff
vlan 20
name Students
vlan 30
name Guest(Default)
vlan 88
name Native
vlan 99
name Management
interface range fa0/11 - 17
switchport mode access
switchport access vlan 10
interface range fa0/18 - 24
switchport mode access
switchport access vlan 20
interface range fa0/6 - 10
switchport mode access
switchport access vlan 30
interface g0/1
switchport mode trunk
switchport trunk native vlan 99
interface range fa0/1 - 5 , g1/2
shutdown
do write
!R1!!!!!!!!!!!!!!!!!!
 ena
 conf t
 interface GigabitEthernet0/1
 no shutdown
 interface GigabitEthernet0/1.10
 encapsulation dot1Q 10
 ip address 172.17.10.1 255.255.255.0
 interface GigabitEthernet0/1.20
 encapsulation dot1Q 20
 ip address 172.17.20.1 255.255.255.0
 interface GigabitEthernet0/1.30
 encapsulation dot1Q 30
 ip address 172.17.30.1 255.255.255.0
 interface GigabitEthernet0/1.88
 encapsulation dot1Q 88 native
 ip address 172.17.88.1 255.255.255.0
 interface GigabitEthernet0/1.99
 encapsulation dot1Q 99
 ip address 172.17.99.1 255.255.255.0
 do write

From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.

Version 5.02 Version 5.03 Version 6.0 Online Assessment
Chapter 6 Exam Chapter 6 Exam Chapter 6 Exam Online Test
Next Chapter
Chapter 7 Exam Chapter 7 Exam Chapter 7 Exam Online Test
Lab Activities
 6.1.1.5 Packet Tracer – Who Hears the Broadcast
 6.1.2.7 Packet Tracer – Investigating a VLAN Implementation
 6.2.1.7 Packet Tracer – Configuring VLANs
 6.2.2.4 Packet Tracer – Configuring Trunks
 6.2.3.7 Packet Tracer – Troubleshooting a VLAN Implementation – Scenario 1
 6.2.3.8 Packet Tracer – Troubleshooting a VLAN Implementation – Scenario 2
 6.3.3.6 Packet Tracer – Configuring Router-on-a-Stick Inter-VLAN Routing
 6.3.3.8 Packet Tracer – Inter-VLAN Routing Challenge
 6.4.1.2 Packet Tracer – Skills Integration Challenge