7.4.1.2 Packet Tracer – Skills Integration Challenge

Last Updated on March 23, 2018 by Admin

7.4.1.2 Packet Tracer – Skills Integration Challenge

Packet Tracer – Skills Integration Challenge (Answer Version)

Topology

Addressing Table

Device	Interface	IP Address	Subnet Mask	Default Gateway
HQ	G0/0	172.16.127.254	255.255.192.0	N/A
	G0/1	172.16.63.254	255.255.192.0	N/A
	S0/0/0	192.168.0.1	255.255.255.252	N/A
	S0/0/1	64.104.34.2	255.255.255.252	64.104.34.1
Branch	G0/0	172.16.159.254	255.255.240.0	N/A
	G0/1	172.16.143.254	255.255.240.0	N/A
	S0/0/0	192.168.0.2	255.255.255.252	N/A
HQ1	NIC	172.16.64.1	255.255.192.0	172.16.127.254
HQ2	NIC	172.16.0.2	255.255.192.0	172.16.63.254
HQServer.pka	NIC	172.16.0.1	255.255.192.0	172.16.63.254
B1	NIC	172.16.144.1	255.255.240.0	172.16.159.254
B2	NIC	172.16.128.2	255.255.240.0	172.16.143.254
BranchServer.pka	NIC	172.16.128.1	255.255.240.0	172.16.143.254

Scenario

In this challenge activity, you will finish the addressing scheme, configure routing, and implement named access control lists.

Requirements

1. Divide 172.16.128.0/19 into two equal subnets for use on Branch.
   1. Assign the last usable address of the second subnet to the Gigabit Ethernet 0/0 interface.
   2. Assign the last usable address of the first subnet to the Gigabit Ethernet 0/1 interface.
   3. Document the addressing in the Addressing Table.
   4. Configure Branch with appropriate addressing
2. Configure B1 with appropriate addressing using the first available address of the network to which it is attached. Document the addressing in the Addressing Table.
3. Configure HQ and Branch with RIPv2 routing according to the following criteria:
   • Advertise all three attached networks. Do not advertise the link to the Internet.
   • Configure appropriate interfaces as passive.
4. Set a default route on HQ which directs traffic to S0/0/1 interface. Redistribute the route to Branch.
5. Design a named access list HQServer to prevent any computers attached to the Gigabit Ethernet 0/0 interface of the Branch router from accessing HQServer.pka. All other traffic is permitted. Configure the access list on the appropriate router, apply it to the appropriate interface and in the appropriate direction.
6. Design a named access list BranchServer to prevent any computers attached to the Gigabit Ethernet 0/0 interface of the HQ router from accessing the Branch server. All other traffic is permitted. Configure the access list on the appropriate router, apply it to the appropriate interface and in the appropriate direction.

Branch Configuration

hostname Branch
!
interface GigabitEthernet0/0
ip address 172.16.159.254 255.255.240.0
ip access-group HQServer in
no shut
!
interface GigabitEthernet0/1
ip address 172.16.143.254 255.255.240.0
no shut
!
interface Serial0/0/0
ip address 192.168.0.2 255.255.255.252
no shut
!
router rip
version 2
passive-interface GigabitEthernet0/0
passive-interface GigabitEthernet0/1
network 172.16.0.0
network 192.168.0.0
no auto-summary
!
ip access-list standard HQServer
deny 172.16.128.0 0.0.31.255
permit any

 

HQ Configuration

hostname HQ
!
interface GigabitEthernet0/0
ip address 172.16.127.254 255.255.192.0
ip access-group BranchServer in
no shut
!
interface GigabitEthernet0/1
ip address 172.16.63.254 255.255.192.0
no shut
!
interface Serial0/0/0
ip address 192.168.0.1 255.255.255.252
no shut
!
interface Serial0/0/1
ip address 64.104.34.2 255.255.255.252
no shut
!
router rip
version 2
passive-interface GigabitEthernet0/0
passive-interface GigabitEthernet0/1
passive-interface Serial0/0/1
network 172.16.0.0
network 192.168.0.0
default-information originate
no auto-summary
!
ip route 0.0.0.0 0.0.0.0 Serial0/0/1
!
ip access-list standard BranchServer
deny 172.16.64.0 0.0.63.255
permit any