Last Updated on March 24, 2018 by Admin
11.3.3.3 Packet Tracer – Using Show Commands
From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.
Packet Tracer – Using Show Commands (Answer Version)
Answer Note: Red font color or gray highlights indicate text that appears in the Answer copy only.
Objectives
Part 1: Analyze Show Command Output
Part 2: Reflection Questions
Background
This activity is designed to reinforce the use of router show commands. You are not required to configure, but rather examine the output of several show commands.
Part 1: Analyze Show Command Output
Step 1: Connect to ISPRouter
- Click ISP PC, then the Desktop tab, followed by Terminal.
- Enter privileged EXEC mode.
- Use the following show commands to answer the Reflection Questions in Part 2:
show arp
show flash:
show ip route
show interfaces
show ip interface brief
show protocols
show users
show version
Part 2: Reflection Questions
- Which commands would provide the IP address, network prefix, and interface? show ip route, show protocols (before IOS 15, the show ip route command did not display the IP address of the interfaces)
- Which commands provide the IP address and interface assignment, but not the network prefix? show ip interface brief
- Which commands provide the status of the interfaces? show interfaces, show ip interface brief
- Which commands provide information about the IOS loaded on the router? show version
- Which commands provide information about the addresses of the router interfaces? show arp, show interfaces
- Which commands provide information about the amount of and Flash memory available? show version, show flash
- Which commands provide information about the lines being used for configuration or device monitoring? show users
- Which commands provide traffic statistics of router interfaces? show interfaces
- Which commands provide information about paths available for network traffic? show ip route
- Which interfaces are currently active on the router? GigabitEthernet 0/0, Serial 0/0/1
From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to "Online Test" link below.
Suggested Scoring Rubric
Each question is worth 10 points for a total score of 100.