Last Updated on October 29, 2020 by Admin
What is a requirement to configure a trunking EtherChannel between two switches?
- The participating interfaces must be physically contiguous on a switch.
- The allowed range of VLANs must be the same on both switches.
- The participating interfaces must be on the same module on a switch.
- The participating interfaces must be assigned the same VLAN number on both switches.
Answers Explanation & Hints: To enable a trunking EtherChannel successfully, the range of VLANs allowed on all the interfaces must match; otherwise, the EtherChannel cannot be formed. The interfaces involved in an EtherChannel do not have to be physically contiguous, or on the same module. Because the EtherChannel is a trunking one, participating interfaces are configured as trunk mode, not access mode.