Last Updated on November 2, 2020 by Admin
A technician configures a switch with these commands:
SwitchA(config)# interface vlan 1
SwitchA(config-if)# ip address 192.168.1.1 255.255.255.0
SwitchA(config-if)# no shutdown
What is the technician configuring?
- Telnet access
- SVI
- password encryption
- physical switchport access
Answers Explanation & Hints: For a switch to have an IP address, a switch virtual interface must be configured. This allows the switch to be managed remotely over the network.