Last Updated on July 28, 2020 by Admin
220.127.116.11 Lab – Install the Power Supply Answers
Lab – Install the Power Supply (Answers Version)
Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.
In this lab, you will install a power supply in a computer case.
- Power supply with a compatible form factor to the computer case
- Computer case
- Tool kit
- Power supply screws
Step 1: Open the Computer Case.
a: Remove the screws from the side panels.
b: Remove the side panels from the computer case.
Step 2: Install the Power Supply.
a: Align the screw holes in the power supply with the screw holes in the case.
b: Secure the power supply to the case with the power supply screws.
c: If the power supply has a voltage selection switch, set this switch to match the voltage in your area.
What is the voltage in your area?
Answers may vary. Either 110/115v or 220/230v.
How many screws secure the power supply in the case?
Answers may vary. Usually 4.
What is the total wattage of the power supply?
Answers may vary.
d: This lab is complete. Please ask the Answers to verify your work.
End of Document