Last Updated on October 12, 2019 by Admin
2.1.2.5 Lab – Install the Power Supply Answers – ITE v7.0
Lab – Install the Power Supply (Answer Version)
Answer Note: Red font color or gray highlights indicate text that appears in the Answer copy only.
Introduction
In this lab, you will install a power supply in a computer case.
Recommended Equipment
- Power supply with a compatible form factor to the computer case
- Computer case
- Tool kit
- Power supply screws
Instructions
Step 1: Open the Computer Case.
- Remove the screws from the side panels.
- Remove the side panels from the computer case.
Step 2: Install the Power Supply.
- Align the screw holes in the power supply with the screw holes in the case.
- Secure the power supply to the case with the power supply screws.
- If the power supply has a voltage selection switch, set this switch to match the voltage in your area.
Questions:
What is the voltage in your area?
Type your answers here.
Answers may vary. Either 110/115v or 220/230v.
How many screws secure the power supply in the case?
Type your answers here.
Answers may vary. Usually 4.
What is the total wattage of the power supply?
Type your answers here.
Answers may vary. - This lab is complete. Please ask the Answer to verify your work.