Last Updated on October 29, 2020 by Admin
Refer to the exhibit. R1 has been configured as shown. However, PC1 is not able to receive an IPv4 address. What is the problem?
- R1 is not configured as a DHCPv4 server.
- A DHCP server must be installed on the same LAN as the host that is receiving the IP address.
- The ip helper-address command was applied on the wrong interface.
- The ip address dhcp command was not issued on the interface Gi0/1.
The ip helper-address command has to be applied on interface Gi0/0. This command must be present on the interface of the LAN that contains the DHCPv4 client PC1 and must be directed to the correct DHCPv4 server.