Last Updated on October 17, 2019 by Admin
ITN Chapter 10 Quiz Answers Cisco 2019 100%
This quiz covers the content in CCNA R&S Introduction to Networks Chapter 10. It is designed to provide an additional opportunity to practice the skills and knowledge presented in the chapter and to prepare for the Chapter Exam.
-
Which TCP/IP model layer is closest to the end user?
- application
- internet
- network access
- transport
Explanation: End users use applications to interact with and use the network. The application layer of the TCP/IP model is closest to the end user. Application layer protocols are used to communicate and exchange messages with other network devices and applications. The layers of the TCP/IP model are from top to bottom (memory aid – ATIN): application, transport, internet, network access
-
What is an advantage of SMB over FTP?
- Only with SMB can data transfers occur in both directions.
- Only SMB establishes two simultaneous connections with the client, making the data transfer faster.
- SMB is more reliable than FTP because SMB uses TCP and FTP uses UDP.
- SMB clients can establish a long-term connection to the server.
Explanation: SMB and FTP are client/server protocols that are used for file transfer. SMB allows the connecting device to access resources as if they were on the local client device. SMB and FTP use the TCP protocol for connection establishment and they can transfer data in both directions. FTP requires two connections between the client and the server, one for commands and replies, the other for the actual file transfer.
-
What type of information is contained in a DNS MX record?
- the FQDN of the alias used to identify a service
- the IP address for an FQDN entry
- the domain name mapped to mail exchange servers
- the IP address of an authoritative name server
Explanation: MX, or mail exchange messages, are used to map a domain name to several mail exchange servers that all belong to the same domain.
-
Which three protocols or standards are used at the application layer of the TCP/IP model? (Choose three.)
- TCP
- HTTP
- MPEG
- GIF
- IP
- UDP
Explanation: HTTP, MPEG, and GIF operate at the application layer of the TCP/IP model. TCP and UDP operate at the transport layer. IP operates at the internet layer.
-
True or False?
In FTP transactions, an FTP client uses the pull method to download files from an FTP server.
- true
- false
Explanation: The File Transfer Protocol (FTP) is a commonly used application layer protocol. FTP allows for data transfers between a client and a server. During data transfers, the FTP client downloads (pulls) data from the server. The FTP client can also upload (push) data to the server.
-
On a home network, which device is most likely to provide dynamic IP addressing to clients on the home network?
- a dedicated file server
- a home router
- an ISP DHCP server
- a DNS server
Explanation: On a home network, a home router usually serves as the DHCP server. The home router is responsible for dynamically assigning IP addresses to clients on the home network. ISPs also use DHCP, but it usually assigns an IP address to the Internet interface of the home router, not the clients on the home network. In businesses, it is common to have a file or other dedicated server provide DHCP services to the network. Finally, a DNS server is responsible for finding the IP address for a URL, not for providing dynamic addressing to network clients.
-
What is a common protocol that is used with peer-to-peer applications such as WireShare, Bearshare, and Shareaza?
- Ethernet
- Gnutella
- POP
- SMTP
Explanation: The Gnutella protocol is used when one user shares an entire file with another user. A person would load a Gnutella-based application such as gtk-gnutella or WireShare and use that application to locate and access resources shared by others.
-
What is true about a client-server network?
- The network includes a dedicated server.
- Each device can function as a server and a client.
- Workstations access network resources using SAMBA or Gnutella.
- Each peer accesses an index server to get the location of a resource stored on another peer in what is considered a hybrid network system.
Explanation: In a client-server network, a dedicated server responds to service requests from clients. The roles of client and server are not shared on each host in the network. In a peer-to-peer network, computers are connected via a network and can share resources. Each host can function as a server or a client based on the nature of the transaction and what resources are used or requested. A hybrid network is one in which a server supplies index information that enables a peer to locate resources on other peers. In this case the peers can still have the role of client or server depending on the nature of the network transaction.
-
Which protocol can be used to transfer messages from an email server to an email client?
- SMTP
- POP3
- SNMP
- HTTP
Explanation: SMTP is used to send mail from the client to the server but POP3 is used to download mail from the server to the client. HTTP and SNMP are protocols that are unrelated to email.
-
A wired laser printer is attached to a home computer. That printer has been shared so that other computers on the home network can also use the printer. What networking model is in use?
- peer-to-peer (P2P)
- client-based
- master-slave
- point-to-point
Explanation: Peer-to-peer (P2P) networks have two or more network devices that can share resources such as printers or files without having a dedicated server.
-
Which three layers of the OSI model provide similar network services to those provided by the application layer of the TCP/IP model? (Choose three.)
- physical layer
- session layer
- transport layer
- application layer
- presentation layer
- data link layer
Explanation: The three upper layers of the OSI model, the session, presentation, and application layers, provide application services similar to those provided by the TCP/IP model application layer. Lower layers of the OSI model are more concerned with data flow.
-
A user is attempting to access http://www.cisco.com/ without success. Which two configuration values must be set on the host to allow this access? (Choose two.)
- DNS server
- source port number
- HTTP server
- default gateway
- source MAC address
Explanation: In order to use a URL such as http://www.cisco.com, the DNS protocol must be used in order to translate the URL into an IP address. Furthermore, the host device requesting this web page must have a default gateway configured in order to communicate with remote networks.
-
Why is DHCP preferred for use on large networks?
- Large networks send more requests for domain to IP address resolution than do smaller networks.
- DHCP uses a reliable transport layer protocol.
- It prevents sharing of files that are copyrighted.
- It is a more efficient way to manage IP addresses than static address assignment.
- Hosts on large networks require more IP addressing configuration settings than hosts on small networks.
Explanation: Static IP address assignment requires personnel to configure each network host with addresses manually. Large networks can change frequently and have many more hosts to configure than do small networks. DHCP provides a much more efficient means of configuring and managing IP addresses on large networks than does static address assignment.
-
Which command is used to manually query a DNS server to resolve a specific host name?
- nslookup
- ipconfig /displaydns
- tracert
- ping
Explanation: The nslookup command was created to allow a user to manually query a DNS server to resolve a given host name. The ipconfig /displaydns command only displays previously resolved DNS entries. The tracert command was created to examine the path that packets take as they cross a network and can resolve a hostname by automatically querying a DNS server. The ping command was created to test reachability on a network and can resolve a hostname by automatically querying a DNS server.